Getweld Single head curling machine is specially designed for the outer tank body with length less than 400mm. With the working of rollers, one side edge is pressed and formed with the targeted shape, then go for another edge. The formed edge connects with the end cap firmly.

GetWeld Single Head Curling Machine is Under Running at the Buyer’s Site

Equipment Introduction

GetWeld Single head curling machine is specially designed for the outer tank body with length less than 400mm. It consists of pre-curling mechanism, forming mechanism and control system. The whole machine has a high degree of automation, with feature of high efficiency, simple operation, stable running and so on.
Manual loading and discharging.

Equipment Technical Parameters

Outer sheet material:                         Carbon steel, GI, Aluminum sheet
Outer sheet thickness:                        0.3-0.8mm
Outer body Dia. range:                       250-800mm
Outer body length range:                   200-1200mm
Power supply voltage:                        Three phase, as per the Buyer’s site requirements
Control voltage:                                  DC24V
Power(Max., not continuously):           2.5 KW
Fluctuations in grid voltage not exceeding ±10% of rated value
Compressed air pressure:                    0.55-0.7mpa
Max. temperature of environment:      50℃
Min. temperature of environment:       0 ℃
Max. humidity: less than 90% and at the same time the monthly average temperature less than 25℃