Getweld Double head curling machine is used for electric water heater outer body edge forming. With the working of rollers, the two edges are pressed and formed at same time with the targeted shape which connects with the end cap firmly.   

GetWeld Double Head Curling Machine is Under Running at the Buyer’s Site

Equipment Introduction

GetWeld Double head curling machine consists of a inlet conveyor line, feeding bracket, curlinging host, feeding& discharging trolley, outlet conveyor line five parts mainly; the whole machine has the characteristics of high degree of automation, high efficiency, convenient operation and simple operation.
Length changing, Dia. changing can be controlled by servo motor and parameters are set in PLC
It can be with manual loading and discharging.

Equipment Technical Parameters

Outer sheet material:                       Carbon steel, GI, Aluminum sheet
Outer sheet thickness:                      0.3-0.8mm
Outer body Dia. range:                     250-800mm
Outer body length range:                400-3000mm
Power supply voltage:                      Three phase, as per the Buyer’s site requirements
Control voltage:                               DC24V
Power(Max., not continuously):        3.5 KW
Fluctuations in grid voltage not exceeding ±10% of rated value
Compressed air pressure:                 0.55-0.7mpa
Max. temperature of environment:   50℃
Min. temperature of environment:    0 ℃
Max. humidity: less than 90% and at the same time the monthly average temperature less than 25℃